This type of plant is dedicated to steel service centres and manufacturers that demand reliability and the maximum productivity.
Our production is capable of covering all the clientele's needs and is divided into categories on the basis of dimensions and thickness of the material to machine and production quantities. These parameters make it necessary to divide the cut-to-length cutting lines into LIGHT, MEDIUM and HEAVY.
LIGHT up to 15 Ton, 1550 mm, thickness from 0.2 mm to 3 mm, speeds up to 200-350 m/min
MEDIUM up to 30 Ton, 1600 mm, thickness from 4 mm to 12.7 mm, speeds up to 150 m/min
HEAVY up to 35 Ton, 2200 mm, thickness from 8 mm to 16 mm, speeds up to 20-40 m/min
The slitting lines are therefore able to work thickness from 0.2 mm to 16 mm with working speeds that range from 20 to 350 m/min depending on the needs of the specific customer.
The slitting line is composed of:
decoiling from coils, trimming, slitting and recoiling the coils.
- circular-blade shear
- braking and stretching unit
- unloading and sorting unit
(other options are available, such as: rubber roller bridle, automatic blade change, scrap winder or cutter, etc.)
Various solutions are used on the basis of specific machining needs in order to meet the clientele's needs; this permits maximum flexibility and the certainty of studying and developing the best solution on the basis of the plans listed below:
The mini slitter line can become an ideal support if the product includes a great variety of coils with reduced widths in which it is certainly not economical to use a large line for cutting coils under 300 mm and especially when very reduced spaces are necessary because of the product type.
Furthermore, the mini-line makes it possible to reach considerable speeds, up to 500 m/min. Other specifications: coil width from 300 mm to 600 mm, coil weight from 3 to 8 Ton, material thickness from 0.2 to 3.2 mm, and automatic decoiling by drawing or by loop.
Recommended for producing narrow coils, but especially a fast line for small spaces and particularly suitable for brass, copper, aluminium, tinfoil and lamination steel but also for cold-rolled, galvanized and prepainted materials and stainless steel.
A high-speed and completely automatic line equipped with CAMU technology that permits production speeds up to 300 m/min. The line is normally composed of uncoiler, and infeed unit, a cropping shear, a circular blade shear, one or two loops, a tension unit, separator discs, a recoiler and an unloading unit.
Other specifications: coil width from 600 mm to 1550 mm, coil weight up to 20Ton, material thickness from 0.2 to 2.0 mm, speed from 80 up to 300mt/min and automatic decoiling by loop.
Recommended for important and big productions of small thicknesses, but especially for tinplate and magnetic steel but also for cold-rolled, galvanized, pre-painted, aluminium, copper, brass, stainless steel and titanium.
This type of line is particularly designed for service centres or for the subsequent production of tubes and open sections. It permits a production speed of up to 200 m/min and is normally composed of a loading cradle, an infeed unit, pre-straightener, a facing shear, a circular blade shear, a loop, a stretching unit, separator discs, a coiler reel and unloading unit.
Other specifications: coil width from 800 mm to 1550 mm, coil weight up to 25Ton, material thickness from 0.8 to 4.0 mm, speed from 80 up to 200mt/min and automatic decoiling by drawing or by loop.
Recommended for important and big productions of medium thicknesses, but especially for hot and cold-rolled and high-strength material, galvanized and stainless steel.
Particularly suitable for large service centres, this line permits production speeds up to 150 m/min. Completely automatic and synchronized to optimize production times, it is differentiated by its robustness and strength as well as by the high quality of the individual components, features that ensure the optimum quality of the end-product.
The line is generally composed of a coil park, a decoiler reel, an infeed unit, a stretching unit, a facing shear, a circular blade shear possibly with automatic blade changer, a loop, a roller tensioning and braking unit, a coiler reel and an unloading unit.
Other specifications: coil width of 800/1550/1830 mm, coil weight up to 30Ton, material thickness from 1.0 to 6.35 mm, speed from 150mt/min and automatic decoiling by drawing or by loop.
Recommended for important and big productions of medium thicknesses, but especially for hot and cold-rolled, stainless steel and high-strength material.
Normally used for the subsequent production of tubes and open profiles. This product range requires reliability and its own specific strength as well as the use of particular technical and mechanical components that make it possible to machine large thicknesses at sustained speed. All the operations are clearly controlled and effected by automatic and hydraulic systems.
It is generally composed of: a coil park, a decoiler reel with bridge-type presser, a bridge-type infeed unit, a stretching unit, a facing shear, a circular blade shear possibly with automatic blade changer, a loop with tables, a tensioning unit, a roller braking unit, a coiler reel and an evacuation and unloading unit.
Other specifications: max coil width of 2200 mm, coil weight up to 35Ton, material thickness from 1.5 up to 12.7 mm and from 2.0 mm up to 16.0mm, speed up to 40-80mt/min and automatic decoiling by drawing or by loop.
Recommended for important and big productions of high thicknesses, but especially for hot and cold-rolled, high-strength material.
Camu lines have a modular design and are intended to work with different types of materials.
Please note that it is highly recommended to carefully clean the line before changing into a different type of material in order to ensure maximum efficiency and avoid any marks or blemishes on the end product.
(*the description is for exemplificative purposes; the technical office is available for studying the most suitable solution on the basis of specific needs).
The experience acquired in over 30 years of activity makes CAMU a solid reference point today in the sector for the machining of delicate materials such as prepainted ones and stainless steel that require particular attention during the entire machining process, especially as regards levelling for which 4H and 6H levellers are used.
- greater productivity, thanks to functionality designed for transforming the tonnes of material in the high-quality finished material warehouses. A cutting-edge electrical system which is the key for increasing total performance and automating the functions that were traditionally carried out by the operator only.
- greater flexibility, necessary for machining a vast range of materials. Thanks to modular design too, the line can further increase your business through the addition of electronic and mechanical updates that are capable of transforming it into a new plant for working different coil sizes and types of material.
- the reliability of CAMU products is known and constitutes a real jewel in our crown. The machines and machining lines have been designed with the utmost care to strength and resistance over time. The reliability and low maintenance requirements, along with the use of standard market components, permit an appreciable reduction of operating costs and optimum productivity. In the case of scheduled maintenance operations or the replacement of worn parts, CAMU design makes it possible to reduce dead times thanks to construction in modular groups that are fast and simple to replace.
Camu S.r.l. - Via dell'Artigianato 20 - 36050 Bressanvido (VI) - ITALY - Tel +39 - 0444 660700 / Fax +39 - 0444 660728 - P.IVA IT02668910249 - email@example.com